Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 31)

Target module »DVI-CPU-Fiber-UC«
Target and user modules · 27
Target module »DVI-CPU-Fiber-UC«
With DVI-CPU-Fiber-UC target modules, you can connect a computer with DVI graphics
output to two different matrix switches of the ControlCenter-Digital series.
At the consoles of both matrix switches, users can access a target module to operate
the connected computer.
Package contents
 1 × Target module DVI-CPU-Fiber-UC
 1 × Video cable (DVI-D-SL)
 1 × USB device cable
 1 × Twin-PS/2 cable
 2 × Audio cable
 1 × Power pack (12V/2A)
 1 × Power cable
Required accessories
 2 × Compatible optical fibre cable to connect the target module to
the matrix switch
NOTE: The user modules con be connected only to an I/O card of the
CCD-I/O 16-Card-Fiber series.
Both, the user module and the I/O card are available as single-mode variants or as
multi-mode variants.
Make sure that the port at the user module, the Dynamic-Port at the IO card and the
optical fibres are compatible with each other.