Guntermann & Drunck DVICenter DP16 Target Modules and User Modules - Standard Variants - Manual (Page 15)

Target module »DVI-CPU-MC2«
Target and user modules · 11
Target module »DVI-CPU-MC2«
With DVI-CPU-MC2 target modules, you can connect a computer with two DVI graph-
ics outputs (dual-head) to a digital matrix switch of the ControlCenter-Digital or the
DVICenter series.
Users at the consoles of the matrix switch can access the target module and operate
the connected computer.
Package contents
 1 × Target module DVI-CPU-MC2
 2 × Video cable (DVI-D-SL)
 1 × USB device cable
 1 × Twin-PS/2 cable
 2 × Audio cable
 1 × Power pack (12V/2A)
 1 × Power cable
Required accessories
 2 × Category 5e (or better) twisted pair cables to connect the target module to the
matrix switch
IMPORTANT: Only consoles configured for multi-monitor operation via channel
grouping can show the images of both of the computer’s video outputs on separate
monitors.
At consoles with one monitor only, the image of the computer’s second video out-
put is not displayed.