Gasboy Atlas Fuel Systems Installation Manual - Manual (Page 7)

MDE-4331M Atlas® Fuel Systems Installation Manual · September 2014 Page 1-1
Purpose Introduction
1 – Introduction
Purpose
This manual provides step-by-step instructions for installing Atlas ® pumps and dispensers.
This manual does not include site preparation instructions. For site preparation instructions,
refer to MDE-4333 Atlas Fuel Systems Site Preparation Manual.
Certain special alternative fuels, such as E85 and additives, can degrade pump/dispenser
performance or integrity if the dispensers are not designed for use with such fuels.
Additionally, converting to certain standard fuels (gasoline, diesel, kerosene, and so on)
from alternative fuels, such as those with ethanol (E85), methanol, or biodiesel, or from
alternative fuels to standard fuels can degrade dispenser performance or integrity. Similar
effects can also occur when converting units to different standard fuel types. As per
Underwriters Laboratories (UL
® ) 87A requirements, nozzles dispensing E85 fuel and
Diesel Exhaust Fluid (DEF) must not be used to dispense any other type of fuel such as
gasoline.
Leaks and potential environmental hazards can result or components may fail
prematurely.
To avoid these issues, follow the guidelines provided for dispensing E85 fuel and DEF in
this manual.
CAUTION
Intended Users
This manual is intended for Authorized Service Contractors (ASCs) who will be involved in
the installation of Atlas pumps and dispensers.
The unit is shipped with the hose elbow facing upward. Ensure to install the unit with the
hose elbow facing downward.
CAUTION