Appendix: totalizer display information – Gasboy ATC M05819K00X Kits User Manual

Page 28

Appendix: Totalizer Display Information

http://www.gasboy.com

· Printed in the U.S.A.

MDE-4431C Gasboy ATC M05819K00X Kits Installation Manual · February 2013

Allen

is a registered trademark of Industrial Fasteners, Inc. Atlas

™

is a trademark of Gasboy Inc. Phillips

is a registered trademark of

Phillips Screw Company. Polycase

is a registered trademark of ECP Corporation. SAF-T-LOK

is a registered trademark of SAF-T-LOK

Chemical Corporation. Teflon

is a registered trademark of E.I. DuPont de Nemours and Company.

Appendix: Totalizer Display Information

By activating the magnet located at the opposite side of the totalizer, following information
will appear on the display.

Information Type

Definition

Example of Display

Volume

Displays uncompensated volume.

0023.43

Probe Temperature

Displays probe temperature (in Celsius only).

0 23.2

Flow Rate

Displays flow rate [in Liters Per Minute (LPM only)].

189.2

Software Version

Displays software version number.

1.30

ATC Status

Displays ATC status.

Leftmost digits (842) are error indicators, which are blank
when the corresponding error condition is not active.
8 = temperature probe fault detected
4 = pulser error occurred
2 = exceptional reset detected

Rightmost digit (2) indicates whether temperature
compensation is enabled, and if so, what product is being
dispensed.
0 = temperature compensation disabled
1 = product is gasoline and compensation enabled
2 = product is diesel and compensation enabled

842 .2