DC Power Technologies Charger Interface Software Manual - Manual (Page 7)

6
© 2014 Enatel Motive Power Ltd. Specifications subject to change without prior notice. Errors
exempt. Pictures may be representative, actual products may differ.
2. Charger Interface Tabs
2.1. Tab Overview
Charger Interface displays the various charger data in a series of tabs within
the main window. Tabs may be closed from view or reopened using the
Charger and Battery Module menus in the main window title bar.
Depending on the user access level, some tabs may not be available.
Indicates a tab accessible only at the Advanced Access level.
Indicates a tab available with additional Software License purchase.
Some tabs such as the Monitoring Tab are undocked by default. These tabs
may be docked to the main window by double-clicking the tab title bar.
Charger Tabs
Charger Status
View recent charge cycles for
insight into the health and usage of
the battery. If the charger is used
to charge multiple batteries, the
battery ID can be selected. Also
available on this tab is the ten
most recent alarms recorded.
Configuration
View the current configuration of
the charger, including battery type,
equalise, scheduled start, and start
delay options. Changing these
options
requires Configuration
access.
Charge Log
Displays the charge cycle log for
saving
to PC. Useful for
determining usage trends, battery
health.
Alarm Log
Displays all recorded charger and
battery alarms for analysis and
saving to PC.
Monitoring
A live display of the current charge
cycle parameters including battery,
charger module and alarm status.
Charge Profiles
View and edit charge profiles for
each battery and charge type.
Bootloader
Update the charger and battery
module firmware.
Alarm Configuration
Configure or re-define alarms
according to urgent/non-urgent
status. On-board relays to activate
according to specified alarm states.
Controller Settings
Advanced control of the charger
low-level
control functions,
including setting service mode,
temperature compensation, fast
charge, auto water and battery
module enable.
Battery Module Tabs
Battery Module Monitoring
Monitor battery status via a battery
module.
Battery Module Configuration
Configure battery module for
battery type and ratings as well as
set charge profile types and
sequences for a battery module.
Battery Module Settings
Additional module settings and
functionality control.
BMM Alarm Log
View and save the alarm log from a
BMM battery module.
BMM Charge Log
View and save the charge log from
a BMM battery module.
BMM Data Log
View and save the data log from a
BMM battery module.
BMM Daily Log
View daily summaries of battery
activity.