DC Power Technologies Charger Interface Software Manual User Manual

Page 40

Text mode
Original mode

exempt. Pictures may be representative, actual products may differ.

Bulk Charge Only, Full Charge
after Delay

Select when opportunity charging using
battery modules. Initiates a full charge
plus equalize charge whenever the
battery remains connected after the
specified delay.

EQ/Refresh Min dv/dt

The rate of change of battery voltage
in mV/15min/cell used to determine
the automatic end point of the refresh

cycle if the refresh voltage does not
reach the Refresh Max Cell Voltage.

EQ/Refresh Constant Voltage

If enabled, the Refresh Maximum cell
Voltage is used as a limit and the
refresh current will reduce to maintain
the battery voltage at the Max cell
Voltage until the Refresh Duration
times out. If disabled then the refresh
charge will terminate when the Max
Cell Voltage is reached.