DC Power Technologies Charger Interface Software Manual User Manual
Page 42

41
© 2014 Enatel Motive Power Ltd. Specifications subject to change without prior notice. Errors
exempt. Pictures may be representative, actual products may differ.
Bulk Charge Only, Full Charge on
Equalise only
Select when opportunity charging using
battery modules. Initiates a full charge
whenever an equalise charge is set to
occur.
Bulk Charge Only, Full Charge after
Delay
Select when opportunity charging using
battery modules. Initiates a full charge
plus equalize charge whenever the
battery remains connected after the
specified delay.
EQ/Refresh Constant Voltage
If enabled, the Refresh Maximum cell
Voltage is used as a limit and the
refresh current will reduce to maintain
the battery voltage at the Max cell
Voltage until the Refresh Duration
times out. If disabled then the refresh
charge will terminate when the Max
Cell Voltage is reached.