Attery, Odule, Onfiguration – DC Power Technologies Charger Interface Software Manual User Manual
Page 22: Battery module configuration tab

21
© 2014 Enatel Motive Power Ltd. Specifications subject to change without prior notice. Errors
exempt. Pictures may be representative, actual products may differ.
2.18. Battery Module Configuration Tab
Use
the
Battery
Module
Configuration Tab to read the
battery module configuration or
configure a new battery module.
The
Configuration
Template
simplifies configuration by choosing
a
predefined
configuration
appropriate for the battery type.
First time use of the template
option requires a template file to be
loaded using Import CSV button on
the Configuration Tab.
Modifying individual configuration
values and other settings requires
Advanced Access.
Battery Ratings
Parameters from the battery rating
plate, Single or Dual Profile
selection.
Dual Profile operation allows two
distinct profiles to be stored in the
battery module. Chargers may be
configured to use the Primary,
Secondary or both profiles in
sequence.
Primary/Secondary Profile
Set start current and basic profile
type for the Primary Profile and if
utilising
Dual
Profiles,
the
Secondary Profile. The A/100Ahr
rate for the start current value is
shown.
Settings
Set a module identifier for quick
reference in logs and other data.
Installed
Date
is
populated
automatically based on the PC’s
clock.
Other optional battery module
configurations
may
be
set
depending on the installation. Swap
Current Direction may be used
where a BMM is reporting reversed
current flow.
Save/Configure Battery Module
to/from File
See Section 4.3 for battery module
backup operations.
Save Lifetime Counters to File
Save a summary of battery lifetime
status counters to CSV file.