Configuration template, Import csv, Charger configuration – DC Power Technologies Charger Interface Software Manual User Manual
Page 10

9
© 2014 Enatel Motive Power Ltd. Specifications subject to change without prior notice. Errors
exempt. Pictures may be representative, actual products may differ.
Configuration Template
2.4.2.
Configuration templates simplify
charger configuration and allow for
accurate
configurations
with
minimal user input. The templates
are pre-set configurations that may
be selected for certain battery
types. A template may be used as-
is (Configuration Access) or loaded
and details fine tuned (Advanced
Access
required
to
adjust
parameters).
Template data is contained in a
CSV formatted file that needs to be
imported into Charger Interface
when using a template for the first
time.
Import CSV
2.4.3.
Charger
Interface
software
packages ship with a Configuration
Template CSV file included. The
CSV file contains the ratings and
related charge configuration data
for
known
battery
types.
To import a CSV, click Import CSV
and locate the CSV file. Typically a
dealer-supplied CSV file is located
in the Charger Interface installation
folder within the Program Files
folder.
Charger Configuration
2.4.4.
The Charger Configuration section
displays the set parameters for a
charger configured for a single
battery type. See Section 3:
Charger
Configuration
for
a
description
of
the
various
charger/battery
module
configuration options, and step-by-
step example configurations.
The Charger Configuration section
displays the fundamental charge
parameters of the charger as
determined by the battery it is
configured for. Modifying these
parameters
requires
Advanced
Access.
Click Read Configuration to
retrieve current values from
the charger.
Always
click
Write
Configuration to save these
settings to the charger. Failure
to do so will leave the charger
with the previous settings.