Print label – DC Power Technologies Charger Interface Software Manual User Manual
Page 11

10
© 2014 Enatel Motive Power Ltd. Specifications subject to change without prior notice. Errors
exempt. Pictures may be representative, actual products may differ.
Nominal Voltage
As defined by the battery, typically
24V/36V/48V
Start Current
Defines the maximum current
delivered in the first stage of the
charge, as recommended by the
battery manufacturer.
Battery Rating
Capacity of the battery, measured
by discharge rate x discharge time.
Typical
motive
batteries
are
measured at a 5 hour (“C5”) rate,
e.g. a 500Ah battery can be
discharged for 5 hours at 100A.
Typical Battery Temperature
An indicative value of the battery
temperature
that
assists
in
managing parameters during a
charge.
Typical Cable Temperature
An indicative value of the battery
cable temperature that assists in
managing parameters during a
charge.
Charge Profile
Profile as selected according to the
battery type and requirements.
Profiles are defined in the Charge
Profiles tab.
Charger Cable Length
Length of cable from charger to
battery. An indicative value used to
manage
parameters
while
charging.
Cable Cross-Sectional Area
Gauge of cable from charger to
battery. An indicative value used to
manage
parameters
while
charging.
Verify Configuration
When
enabled
during
Write
Configuration the charger checks
that the installed modules can
meet the requirements of the
chosen configuration.
Should the required configuration
exceed the capacity of the installed
modules, install further modules or
a larger capacity charger is
required.
Print Label
2.4.5.
Label printing options include
printer selection, label size and
orientation selections. A layout
preview allows selection or removal
of fields from the resulting printout.
A grey field indicates a field that
will not be printed.