Comtech EF Data TRP500 - Manual (Page 93)

TRP500-4450 C-Band Outdoor Amplifier REVISION 1
Appendix B MN-TRP500
B–27
Parameter Type Command
(Instruction
Code and
Qualifier) Arguments for
Command or
Response to
Query Description of Arguments
(Note that all arguments are ASCII numeric
codes between 48 and 57) Response to
Command
(Target to Controller) Query
(Instruction
Code and
Qualifier) Response to
Query
(Target to
Controller)
Retrieve
Maintenance
Status N/A 213 bytes, alpha-
numeric
Query only.
Where:
P24V1 = +24V power supply
P24V2 = +24V switch power supply
P13VT = +13.5V power supply
P10V1 = +10V1 power supply
P10V2 = +10V2 power supply
A10V1 = 10V1 on RF Module
A10V2 = 10V2 on RF Module
P7V8T = +7.8V power supply
P5V8T = +5.8V power supply
P2V5T = +2.5V power supply
P1V2T = +1.2V power supply
N5V8T = -5.8V power supply
FANR1 = Fan 1 speed in percent
FANR2 = Fan 2 speed in percent
FANR3 = Fan 3 speed in percent
FWPWR = Forward power in dBm
RVPWR = Reverse power in dBm
ATEMP = Heatsink temperature in Celsius
OTEMP = Outdoor temperature in Celsius
Example: <1/RMS?’cr’
>0001/RMS=’cr’
P24V1=024.1’cr’
P24V2=024.1’cr’
P13VT=013.4’cr’
P10V1=010.1’cr’
P10V2=010.1’cr’
A10V1=010.1’cr’
A10V2=010.1’cr’
P7V8T=007.8’cr’
P5V8T=005.8’cr’
P2V5T=002.5’cr’
P1V2T=001.2’cr’
N5V8T=-05.7’cr’
FANR1=100.0’cr’
FANR2=100.0’cr’
FANR3=100.0’cr’
FWPWR=+56.2’cr’
RVPWR=<22.0’cr’
ATEMP=+40.0’cr’
OTEMP=+25.0’cr’ RMS= RMS? RMS=x….x
(See description
for details of
arguments)