Comtech EF Data TRP500 - Manual (Page 39)

TRP500-4450 C-band Outdoor Amplifier Revision 1
Ethernet Management MN-TRP500
4–3
4.3.3 SNMP Traps
The TRP500 has the ability to send out SNMP traps when certain events occur in the unit. The
TRP500 sends out traps when a fault occurs in the unit. A trap is sent both when a fault occurs
and is cleared.
The TRP500 supports both SNMPv1 traps and SNMPv2 notifications. Which style of traps the
TRP500 sends can be configured by the user using the TRP500 SNMPTrapVersion OID.
The following are the MIB2 v1traps / v2 notifications that the TRP500 supports:
MIB2 SNMPv1 trap: Authentication Failure 5
MIB2 SNMPv2 notifications: Authentication Failure 1.3.6.1.6.3.1.1.5.5
The following tables are the Faults v1 traps / v2 notifications supported by the TRP500,
excluding those denoted with **italics **.
Faults SNMPv1 traps:
ODUPowerSupply24V1StatusV1 62474801
ODUPowerSupply24V2StatusV1 62474802
ODUPowerSupplyLNBStatusV1 62474803
ODUPowerSupply13VStatusV1 62474804
ODUPowerSupply10VStatusV1 62474805
ODURFPowerSupply10V1StatusV1 62474806
ODURFPowerSupply10V2StatusV1 62474807
ODUPowerSupply7V8TStatusV1 62474808
ODUPowerSupply5V8TStatusV1 62474809
ODUPowerSupply2V5TStatusV1 62474810
ODUPowerSupply1V2TStatusV1 62474811
ODUPowerSupplyNeg5V8TStatusV1 62474812
ODUFan1StatusV1 62474813
ODUFan2StatusV1 62474814
ODUTemperatureStatusV1 62474815
ODUShutdownStatusV1 62474816
ODUI2CStatusV1 62474817
ODUForwardPowerStatusV1 62474818
ODUChecksumStatusV1 62474819
ODUFPGADoneStatusV1 62474820