Comtech EF Data TRP500 - Manual (Page 41)

TRP500-4450 C-band Outdoor Amplifier Revision 1
Ethernet Management MN-TRP500
4–5
4.4 Telnet Interface
The TRP500 provides a Telnet interface for the purpose of Equipment M&C via the standard
equipment Remote Control protocol.
The Telnet interface requires user login at the Administrator level and Read/Write level.
The screen capture below shows the login process:
Once logged into the Telnet interface as the Administrator, the user can access the standard remote
control interface defined in Appendix B. REMOTE CONTROL, as shown in the following
example: