Comtech EF Data TRP500 - Manual (Page 51)

TRP500-4450 C-band Outdoor Amplifier Revision 1
Ethernet Management MN-TRP500
4–15
4.5.5.3 Config Pages
4.5.5.3.1 Config | Amplifier
Figure 4-6. Config | Amplifier page
The ‘Config | Amplifier’ page (Figure 4-6) provides the means to configure the serial
communications, operations, and alarms/faults handling for the amplifier.
Amplifier
•
Amplifier: Using the drop-down menu, select the amplifier as either On or Off.
•
Mute: Using the drop-down menu, select the Mute function as either Enabled or
Disabled.
• AUX Mute: Using the drop-down menu, select the Auxiliary Mute Mode as either
Enabled or Disabled.
•
Fault Recovery: Using the drop-down menu, select Fault Recovery as either Automatic or
Manual.