Comtech EF Data MD2401 - Manual (Page 50)

MD2401 L-Band Multi Demod Installation and Operation Manual User Interfaces
MN-MD2401 4–18
Revision 7
4.5.9 MD2401 Opcode Command Set
The Opcode Command Set is listed below, separated by commands that control the demodulator,
or the entire module.
4.5.10 Demodulator Command Set
RLLP Command Opcode
Query Demodulator All 2401h
Query Demod Latched Alarms 2406h
Query Demod Current Alarms 2409h
Query Demod Status 240Ch
Query Demod Eb/No, Input Level, Raw BER, Corrected
BER, and Frequency Offset, AGC Voltage 240Dh
Query Demod Lock Status 2437h
Command Demod All 2A00h
Command Demod Frequency 2A01h
Command Demod Data Rate 2A02h
Command Demod Sweep Boundary 2A04h
Command Demod Demodulation Type 2A07h
Command Demod Convolutional Decoder 2A08h
Command Demod Differential Decoder 2A09h
Command Demod Reed-Solomon 2A0Ah
Command Demod Descrambler 2A0Dh
Command Demod Descrambler Type 2A0Eh
Command Demod Spectrum 2A0Fh
Command Demod Buffer Clock 2A11h
Command Demod Buffer Clock Polarity 2A12h
Command Demod Operating Mode 2A17h
Command Demod BER Measure Period 2A1Ah
Command Demod Terrestrial Loopback 2A1Ch
Command Demod Baseband Loopback 2A1Dh
Command Demod Center Buffer 2A20h
Command Demod Data Invert 2A21h
Command Demod Buffer Size Time/Bytes 2A31h
4.5.11 Module Command Set
RLLP Command Opcode
Query Module Identification 2403h
Query Module Current Alarms 240Ah
Query Module Time 240Eh
Query Module Date 240Fh
Query Module Time and Date 2410h
Command Module Control Mode 2600h
Command Module Ext Ref Source 2616h
Command Mod Ext Ref Frequency 261Bh
Command Module Clear Latched Alarms 2C03h
Command Module Set Time 2C04h
Command Module Set Date 2C05h
Command Module Set Time and Date 2C06h
Command Module Soft Reset 2C07h