BayTech MRP units 2012 - Manual (Page 66)

Page
66
APPENDIX: LCD DISPLAY DESCRIPTION
=========================================================================
=========================================================================
=========================================================================
=========================================================================
=========================================================================
The Power LED,
PURPLE arrow, is lighted when power is applied to unit.
Current Alarm LED, ORANGE arrow, lights when breaker current exceeds set threshold. Default is 12 amps.
B/C switch set for “B” to function with Baytech supplied cable and adaptor. “C” works with Cisco console
cable.
PWR 1 W = Power for circuit #1 in Watts, Units with multiple circuit
breakers will display PWR 2W, PWR 3W, PWR 4W, PWR 5W, PWR
6W
VAC 1 V = Voltage AC for circuit #1 in Volts, Units with multiple
circuit breakers will display VAC 2V, VAC 3V,VAC 4V, VAC 5V,
VAC 6V
Int T1 ºF 77.0 = 77.0 Degree Internal Temperature
Ext T1 & T2 ºF will be displayed if external probes connected to unit.
Ext T1 67.0 ºF: 30.2% RH, Celsius and Fahrenheit is selectable. ºC =
Celsius Degree; ºF = Fahrenheit Degree; %RH = Relative Humidity.
CUR 1 A = Current for circuit #1 in Amps, Units with multiple circuit
breakers will display CUR 2A, CUR 3A, CUR 4A,
CUR 5A, CUR 6A
Tot kW-h = Total kilo-Watts - hour for the unit as a whole. This is a
running total since the last factory defaulted, kilowatt - hour is unit of
measurement