BayTech MRP units 2012 - Manual (Page 32)

Page
32
STATUS MENU
Status Menu 1: Network Status
Overall System Status
Network Status
Logged Users
Memory Usage
Select 1), System Status provides information about the
local memory, how many TCP sockets are in use, and the
time the unit has been operating since the last unit reset
or power up.
System Status:
Available local memory: 7598080
TCP sockets in use: 0
System up time (dd:hh:mm:ss): 0:00:50:10
Press ENTER to continue
eth0 Link encap:Ethernet HWaddr 00:C0:48:00:01:FD
inet addr:192.168.2.136 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Base address:0x840
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
Press ENTER to continue Select 2),
Network Status contains the
MAC address, IP address, Mask, TX/RX
packets and their status.
C=configuration user *=current process
Active Users:
# USER FROM INTERNAL CONN STATUS PID
1 root localhost
Normal 23
C 2 root 70.150.140.69 Normal 490
* 3 root 70.150.140.66 Normal 492
Strike T, CR to terminate a connection/process, CR to continue :
Select 3), shows the name of the user account,
the type of interface (serial or network) and
the status of the active sessions
Enter number of connection to terminate, CR :
Terminate a session by typing “T” at the prompt. The
unit will display the following:
total: used: free: shared: buffers: cached:
Mem: 11735040 4136960 7598080 0 380928 458752
Swap: 0 0 0
Press ENTER to continue Select 4), shows your
memory being utilized.
URPC Status Menu.
Enter selection, CR to exit.
Overall System Status.............1 Available memory, System up time
Network Status....................2 IP address, MAC, packets
Logged Users......................3 Active users, admin terminates users
Memory Usage......................4 Memory statuses
Current Routing Cache.............5 Current routing caches
Route Setup.......................6 Routing table
Processes.........................7 Processes in memory
UnitInfo Database.................8 Data collection
Enter Request :