beautypg.com

BayTech MRP units 2012 User Manual

Page 46

background image

Page

46 

SSH Enable/Disable 







SSH Host Key Generation 






IP Filter Configuration 

Menu 8: Network IP Filter Configuration

























IP Filtering is ENABLED. Enable? (Y/N): y

Select E),

Enable IP Filtering

enables or disables the filtering
function.

Filter added as Rule 1.

Selecting either DROP or ACCEPT
the packets and the RPC will assign
filter the next rule number:

Please enter a single ip address filter
or an ip address block in ip/ notation.

: 70.150.140.95

Select a target option for this filter:

DROP the packet..................1
ACCEPT the packet................2
Exit.............................X,CR

Enter Request :1

Select A) to

Add Rule

. Type an IP

address, select whether to drop or accept
the address.

Filter Management Menu

Enter request or CR,X to exit menu.

A)...Add Rule
E)...Enable IP Filtering
D)...Delete Rule
V)...View Rules
F)...Flush Rules
C)...Set Default Target

Enter Request :a

Select 11), from Network Port
Configuration Menu
the IP Filter
Management Menu allows the admin
user to pass or block certain IP
Addresses. If you have no rules defined
the unit may display only options (A, E,
C
).

Select 10), from Network Port Configuration Menu allows the user to generate a unique SSH host
key for the RPC unit. This key is part of the SSH encryption process. Each RPC leaving Baytech is
shipped with same default SSH host key. It is important that the user generate a
new SSH host key if SSH communications will be used.

NOTE: It can take the unit up to 10 minutes to generate a new host key.

IMPORTANT: changing this setting will logout all SSH and Telnet sessions

Select 9), from Network Port Configuration Menu enables or disables the SSH feature. Secure Shell
(SSH), sometimes known as Secure Socket Shell, is a Unix-based command interface and protocol for
securely getting access to a remote computer. It is widely used by
network administrators to control Web and other kinds of servers
remotely. Default setting is ENABLED.

SSH is............................Enabled
Enable ? (Y/N), CR for no change) :

Generate ? (Y/N)