Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 - Manual (Page 97)

MAKING EMBROIDERY ADJUSTMENTS
290
Using the Automatic Thread
Cutting Function (End Color
Trim)
The automatic thread cutting function will
cut the thread at the end of sewing each color.
This function is initially turned on. To turn this
function off, press key and then . This
function can be turned on or off during
embroidering.
* This setting returns to its default
when the machine is turned off.
a
Press .
b
Press to turn off the automatic
thread cutting function.
→ The key will display as
.
* When one color thread is sewn, the machine will
stop without cutting the thread.
Using the Thread Trimming
Function (Jump Stitch Trim)
The thread trimming function will
automatically trim any excess thread jumps within
the color. This function is initially turned on. To
turn this function off, press key and then
. This function can be turned on or off
during embroidering.
* Your customized setting remains after turning the
machine off and on.
a Jump stitch
a
Press .
Note
• When this function is turned on, use the
included ball point needle 75/11 for
embroidering patterns with short jump
stitches such as alphabet characters. Using
other needles may cause the thread to
break.