Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 - Manual (Page 63)

CONFIRMING THE PATTERN POSITION
256
f
Press to move the LED pointer on
the fabric for adjusting the first position.
g
Press to apply the setting.
h
Press to move the LED pointer on
the fabric for adjusting the second position.
i
Press to apply the setting.
j
The preview in the screen is updated
according to the specified embroidering
position.
k
Press the “Start/Stop” button to start
embroidering.
■ Selecting the Embroidering Position
by the Pattern Center
a
Press in the following screen.
b
With the sensor pen, touch 2 points on the
fabric corresponding to the numbers in the
center of the embroidery pattern.
a Center line of the pattern
b Pattern position
→ Specified point number turns into red.