Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 - Manual (Page 126)

CONNECTING ROTATED PATTERNS
319
Ad
va
n
ced
Em
br
oi
d
er
y
6
d
After the pattern is sewn, remove the fabric
from the frame, and then measure the
distance that the pattern is to be slid.
a Vertical: 32.8 mm
b Horizontal: 42.8 mm
■ Trial Sewing
Sew trial embroidery to check that the pattern will
be slid the correct distance.
a
Select the pattern, and then continue to the
sewing screen.
b
Press and then, press in the
sewing screen.
c
Embroider the first pattern.
d
Refer to steps
h
through
k
of
“Connecting Three Patterns” on page 307
to select the next pattern.
e
Specify the position of the second pattern
referring to the vertical/horizontal position
measured in step
d
of “Measuring the
Distance That the Pattern Will Be Slid” on
page 318. Press after specifying the
position.
a Connecting point
a Connecting point
b Vertical/Horizontal position
→ Message appears on screen and carriage will move
after pressing .
a
a
b
a