Baby Lock Embellisher (EMB12-2) Yarn and Ribbon Guide - Manual

Proper threading for embellishing with yarn.
1. While sitting in front of the machine insert yarn into the third hole of
the Yarn & Ribbon Guide as shown in Fig. 1.
2. Wrap yarn to the underside of Yarn & Ribbon Guide and insert into
the second hole as shown in Fig. 2.
3. Once again, wrap yarn to the underside of Yarn & Ribbon Guide and
insert into the first hole as shown in Fig. 3.
4. Guide yarn over to the left and insert into the Yarn Port using the yarn
threader as shown in Fig. 4.
Yarn & Ribbon Guide
Fig. 1 Fig. 2 Fig. 3 Fig. 4
At the beginning of the yarn
embellishing, slightly pull the
end of the yarn.