Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 - Manual (Page 143)

IQ DESIGNER WITH SCAN
336
c
Attach the embroidery unit to the machine,
and then turn on the machine.
* Refer to “Attaching the Embroidery Unit” on
page 197.
d
Press the “Presser Foot Lifter” button to
raise the presser foot, and then press the
“Needle Position” button to raise the
needle.
* The presser foot is not raised high enough when
raised with the presser foot lever.
e
After attaching the scanning frame to the
embroidery unit, swing the frame-securing
lever toward you to secure the frame.
* *Refer to “ATTACHING THE EMBROIDERY
FRAME” on page 247.
■ Scanning with an Embroidery Frame
Drawings and illustrations can also be scanned
using an embroidery frame. Hoop the embroidery
frame with fabric larger than the frame. Place the
paper to be scanned on the fabric, and then secure it
with tape.
When not using the scanning frame, prepare a line
drawing that can easily be scanned.
a Fabric
b Tape
Scanning to Trace Background
Image
If you have a favorite picture or drawing, it can
easily be traced on the scanned background image
and you can create your own pattern.
a
Press .
→ The image display screen appears.
Note
• Make sure that presser foot and needle are
fully raised. If scanning is started with the
presser foot and needle lowered, the
scanning frame may hit the machine,
causing damage.
Note
• Unthread the machine to avoid having the
thread slipping out of the needle or getting
caught on the embroidery frame.
• Be sure not to attach the presser foot other
than the embroidery foot “W+” or “W”,
otherwise the presser foot will be scanned.