beautypg.com

Caution – Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 User Manual

Page 168

background image

PREPARING FOR BOBBIN WORK

361

H

o

w

to
Cr
ea

te

Bob

b

in
W

o

rk

8

g

Insert the bobbin case so that the

S

mark

on the bobbin case aligns with the

mark

on the machine.

*

Align the

S

and

marks.

a

S mark on the bobbin case

b

mark on the machine

c Bobbin case

h

Install the needle plate cover.

For details on installing the needle plate cover, refer to
“Cleaning the Race” of “Appendix”.

a Needle plate cover

i

Install the flat bed attachment.

j

Insert the thread tail from the spool of
thread through the hole in the bobbin from
the inside to the outside. Hold the thread
tail while winding the thread around the
bobbin by hand. After winding the bobbin
so it is filled as shown below (about 80%),
cut the thread.

Note

• The bobbin case (gray) cannot be used for

sewing in any way other than bobbin work.
After sewing bobbin work, refer back to the
steps in “Preparing the Bobbin Thread” on
page 360 for removing and cleaning the
bobbin case (gray), and then reinstall the
standard bobbin case (black).

CAUTION

• Be sure to use the bobbin case (gray) when

creating bobbin work. Using any other bobbin
case may result in the thread becoming
tangled or damage to the machine.

• Make sure that the bobbin case is correctly

installed. If the bobbin case is incorrectly
installed, the thread may become tangled or
the machine may be damaged.

a

b

b

a