Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 - Manual (Page 84)

VARIOUS EMBROIDERING FUNCTIONS
277
Ad
va
n
ced
Em
br
oi
d
er
y
6
Creating an Appliqué Piece
Appliqué pieces can be created from the built-in
patterns and patterns on embroidery cards. This is
convenient for fabrics that cannot be embroidered
or when you wish to attach an appliqué to a
garment.
■ Creating an Appliqué Piece
The following pattern will be used to create an
appliqué piece.
a
Select the pattern, and edit it if necessary.
b
Press to display the settings screen.
c
Use and to specify the distance
between the pattern and the appliqué
outline.
d
Press .
e
Press .
Note
• Felt or denim fabrics are recommended to
make the appliqué piece. Depending on the
pattern and fabric used, lighter weight
fabrics may cause the stitching to appear
smaller.
• For best results, be sure to use stabilizer
material for embroidering.
• Select a frame that matches the pattern
size. Frame options are displayed on the
LCD screen.
• When making appliqué pieces, do not use
the border embroidery frame. Depending on
the pattern density and fabric used,
shrinkage of the stitching may occur.
Note
• Finish combining and editing the pattern
before selecting the appliqué setting. If the
pattern is edited after selecting the appliqué
setting, the appliqué stitching and pattern
may become misaligned.
• Since an outline is added, the pattern for an
appliqué piece (when the appliqué setting is
selected) will be larger than the original
pattern. First, adjust the size and position of
the pattern as shown below.
a Embroidering area
b Approx. 10 mm (3/8 inch)
c Pattern size