Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 - Manual (Page 85)

VARIOUS EMBROIDERING FUNCTIONS
278
f
Press and then, press to
position the satin stitching around design.
→ The steps for creating the appliqué piece are added
to the sewing order.
g
Fuse or stick a piece of stabilizer to the
back of the felt or denim fabric to be used
as the appliqué piece.
Note
• When is pressed, the pattern is moved
to the center. After selecting the appliqué
setting, move the pattern to the desired
position.
Memo
• To cancel the setting, press .
• If no pattern is selected, the key appears
darkened and cannot be selected.
Memo
• Three steps are added to the sewing order:
appliqué cutting line, position of pattern
placement on the garment, and appliqué
stitching.
a Cutting line for appliqué
b Position of pattern placement on garment
c Appliqué stitching
Note
• An appliqué piece cannot be created if the
pattern is too large or too complicated or a
combined pattern is separated. Even if the
selected pattern fits within the embroidering
area, the entire appliqué pattern may
exceed the embroidering area when the
outline is added. If an error message
appears, select a different pattern or edit it.
Note
• For best results, be sure to use stabilizer
material for embroidering.
a
b
c