Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 - Manual (Page 119)

USING THE CAMERA TO CONNECT PATTERNS
312
q
After the positioning stickers have been
detected, press , and then remove the
stickers.
r
Lower the presser foot, and then embroider
the second pattern.
→ When embroidering is finished, the following
message appears.
To connect a third pattern, press .
s
When the following message appears, press
.
t
Select the third pattern C, and press .
u
Press , and then select how the
patterns will be connected.
→ The pattern connection setting screen appears.
v
Specify the position of the third pattern
referring to the screen display.
In this example, press 2 times and then, press
. Press after specifying the position.
a Connecting point
b Second pattern B
c Third pattern C
Memo
• You can edit the third pattern in this screen.
a
b
c