Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 - Manual (Page 83)

VARIOUS EMBROIDERING FUNCTIONS
276
Basting Embroidery
Before embroidering, basting stitches can be sewn
along the outline of the pattern. This is useful for
embroidering fabric that cannot have stabilizer
material affixed with an iron or adhesive. By
stitching stabilizer material to the fabric, shrinkage
of the stitching or misaligned pattern can be
minimized.
a
Press .
b
Use and to specify the distance from
the pattern to the basting stitching.
c
Press to return to the previous
screen.
d
Press .
e
Press to select the basting setting.
→ Basting is added to the beginning of the sewing
order.
f
Press the “Start/Stop” button to begin
embroidering.
g
When embroidering is finished, remove the
basting stitching.
Note
• It is recommended to finish combining and
editing the pattern before selecting the
basting setting. If the pattern is edited after
selecting the basting setting, the basting
and pattern may become misaligned, and
the basting under the pattern may be
difficult to remove after embroidering is
complete.
Memo
• The higher the setting, the farther the
basting is from the pattern.
• The setting remains selected even if the
machine is turned off.
Note
• When is pressed, the pattern is moved
to the center. After selecting the basting
setting, move the pattern to the desired
position.
Memo
• To cancel the setting, press .
• If no pattern is selected, the key appears
gray and cannot be selected.