Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 - Manual (Page 70)

EMBROIDERING A PATTERN
263
Bas
ic Em
b
ro
ide
ry
5
■ 1. Creating the Appliqué Piece
a
Select the appliqué pattern, and then
continue to the embroidering screen.
b
Attach stabilizer material to the wrong side
of the appliqué fabric.
Hoop the fabric in the embroidery frame, and then
attach the embroidery frame to the embroidery unit.
a Appliqué (cotton, felt, etc.)
b Stabilizer
c
Thread the machine with the embroidery
thread, lower the presser foot lever, and
then press the “Start/Stop” button to sew
the cutting line of the appliqué piece.
→ The outline of the appliqué piece is sewn, and then
the machine stops.
a Cutting line for appliqué piece
b Fabric for appliqué piece
d
Remove the fabric for the appliqué piece
from the embroidery frame, and then
carefully cut along the sewn cutting line.
■ 2. Sewing the Appliqué Position on
the Base Fabric
a
Attach stabilizer material to the wrong side
of the fabric for the appliqué base.
Hoop the fabric in the embroidery frame, and then
attach the embroidery frame to the embroidery unit.
Note
• If (appliqué piece),
(appliqué position) and (appliqué)
appear in the embroidery color order
display, the names and numbers of the
thread colors to be used will not appear.
Select the thread colors according to those
in the appliqué pattern.
Note
• If the appliqué piece is cut out along the
inside of the cutting line, it may not be
correctly attached to the fabric. Therefore,
carefully cut out the appliqué piece along
the cutting line.
• After cutting out the appliqué piece,
carefully remove the thread.