Caution, Attaching the embroidery frame – Baby Lock Destiny (BLDY) Instruction & Reference Guide-Part2 User Manual
Page 54

ATTACHING THE EMBROIDERY FRAME
247
Bas
ic Em
b
ro
ide
ry
5
a
Press the “Presser Foot Lifter” button to
raise the presser foot.
b
Align the embroidery frame guide with the
right edge of the embroidery frame holder.
a Embroidery frame holder
b Embroidery frame guide
c
Slide the embroidery frame into the holder,
making sure to align the embroidery frame’s
with the holder’s
.
a Arrow mark
d
Lower the frame-securing lever to be level
with the frame to secure the embroidery
frame in the embroidery frame holder.
a Frame-securing lever
■ Removing the Embroidery Frame
a
Raise the frame-securing lever.
ATTACHING THE EMBROIDERY FRAME
Note
• Wind and insert the bobbin before attaching the embroidery frame.
CAUTION
• If the frame-securing lever is not lowered, the
following message appears. You cannot start
sewing until you lower the frame-securing
lever.