Avery Dennison PCL - Manual (Page 79)

PAXAR PCL APPENDIX D – PCL Summary 7.2 •••• 77
~XUB9 Barcode Exclusion
B9 – Barcode Exclusion SV100 Scanner Only
This command allows for specified barcodes on the tag
NOT to be verified. This command is ONLY valid with
the SV100 verifier. The barcodes can be excluded by
replacing the 9 with the following;
0 = Exclude none
1 = Exclude UPC-A, UPC-E, EAN-8, EAN-13
2 = Exclude Code 39
4 = Exclude Code 128, EDI Code 128
8 = Exclude Interleave 2 of 5
16 = Exclude Code 93
To exclude multiple barcodes, replace the 9 with the sum
of the values designating the barcodes to exclude.
Example: To exclude code 39 and Interleave 2 of 5, add the
2 and the 8 together and the command would be ~XUB10.
636, 656, 676, 686, SNAP
~XUR999 RFID Read Power SNAP 700
~XUW999 RFID Write Power SNAP 700
~XUA9 RFID Signal Adjust SNAP 700
~XUX9 RFID Write Retries SNAP 700
~XUP99 RFID Protocol SNAP 700
~XH99 Head Strobe Value - 1 to 15 630