Avery Dennison PCL - Manual (Page 56)

54 •••• Connection Guide PAXAR PCL
AVERY DENNISON 960
The 960 printer must have the PCL option installed on the printer in order to accept
PCL Commands.
Currently there is not a debug mode available on the 960 printer.
AVERY DENNISON 6X6,SNAP
Currently there is not a debug mode available on the 636, 656, 686 or 545 printers.
AS/400 Communications Information for a AVERY
DENNISON PCL Printer
Listed below are the settings required by an IBM AS/400 using Andrew Corporation's
Interlynx protocol converter. These settings must be correct in order for the
communications and batching to work properly with a AVERY DENNISON 630 or
650 printer using PCL. The communications with an AS/400 has only been tested
using an Interlynx protocol converter. This example uses a straight thru RS232 cable
that is unmodified between the Interlynx protocol converter and the AVERY
DENNISON Printer.
AS/400 Local Settings: (OS Ver 2 Rel 1 Mod 1)
Display Device Description
Device description . . . . . . . . DEVD PX
Option . . . . . . . . . . . . . . . . . OPTION *ALL
Category of device . . . . . . . . *PRT
Device class . . . . . . . . . . . . DEVCLS *LCL
Device type . . . . . . . . . . . . TYPE 5225
Device Model . . . . . . . . . . . . MODEL 4
Advanced function printing . . AFP *NO
Port Number . . . . . . . . . . . . . PORT 5
Switch Setting . . . . . . . . . . . . SWTSET 3
Online at IPL . . . . . . . . . . . . ONLINE *YES
Attached controller . . . . . . . CTL CTL01
Form feed . . . . . . . . . . . . . . FORMFEED *CONT
Printer error message . . . . . . PRTERRMSG *INQ
Message queue . . . . . . . . . . . MSGQ RDSP040CB
Library . . . . . . . . . . . *LIBL
NOTE: The following information is for legacy
applications. The equipment mentioned may not be
available and the information may be obsolete. Please
contact your IT specialist for more information.