Avery Dennison PCL - Manual (Page 28)

26 •••• Reference Guide PAXAR PCL
~AC999 960,6X6,SNAP
This command selects the code page that is to be used for character translations. For
example: To select code page 850 - send the command ~AC850. Currently available
code pages are AVERY DENNISON Code Pages 000, 001 (Compatible with older
AVERY DENNISON printers.), Code Page 437, Code Page 850, Code Page 851, Code
Page 852, Code Page 857 and 866.
~AP99 6X6,SNAP
This command specifies the point size of the printed text in the field. This command
only applies to the scaleable fonts.
Compatibility Note:
636, 656 (240 dpi) The range for the point size is 6 to 96.
636, 656, 676, 686 (300 dpi) The range for the point size is 4 to 96.
545 The range for the point size is 6 to 96.
~A199 630,650,6X6,SNAP
This command specifies the printed field order number for a source field in a Data
Copy. (See note in command A3)
~A299 630,650,6X6,SNAP
This command specifies the start character for a Data copy. (See note in command A3)
~A399 630,650,6X6,SNAP
This command specifies the number of characters to be copied for a Data Copy.
Note: This group of Data Copy commands allows duplicate data to be sent just once
and the printer will take care of copying the data into other fields.
The A1 command specifies the field number of the field containing the data to
be copied. (The field number is determined by the order that the fields are
listed in the format, with the first field being field one.)
The A2 command specifies the character position within the specified field to
start copying. (The first character in the data string is character one.)
The command A3 specifies how many characters to be copied. This count
includes the start character.
For example, if field number 2 contains the data AVERY DENNISON
CORPORATION and this field should contain AVERY DENNISON, the
commands ~A102 (Data source is field 2), ~A201 (starting character is the
first character), and ~A314 (14 characters are to be copied) would be sent to
the printer.
~AS99 630,650,6X6,SNAP
This command activates auto-incrementing. Auto-incrementing means that this field
will start at the data value which it is sent and increment using the step size that is
specified in this command. The step size of the increment is specified in 99. An
increment of zero turns off auto-incrementing.
Compatibility Note: