Avery Dennison PCL - Manual (Page 38)

36 •••• Reference Guide PAXAR PCL
replace the '99' are 20, 21, 22, 23, ..., 28, 29, 30 for the ratio values of 2.0:1,
2.1:1, 2.2:1, 2.3:1, ..., 2.8:1, 2.9:1, 3.0:1.
S9 Supplement to the UPC / EAN barcodes. Supplemental bars can be appended to the
main barcode by selecting the values of 2 for the +2 supplement, and 5 for the +5
supplement. The number of characters must be increased in the command FB to
accommodate the supplement.
D99 Matrix size for the Data Matrix barcode. Replace 99 with one of the following
values;
X9 Specifies the X undercut for the GS1Databar barcodes. Each bar will be reduced in
width by this value ( in pixels) to compensate for thermal blooming. Must be at
least 1 less than the specified expansion (X Dimension). Default is 0.
Y9 Specifies the Y undercut for the GS1 Databar barcodes. The barcode will be
reduced in height by this value (in pixels)to compensate for thermal blooming.
Default is 0.
N99 Specifies the maximum number of segments per row for the GS1 Databar
Expanded barcode. If the data required more than this number of segments, the
barcode will be split into 2 or more rows (referred to as a GS1 Databar Expanded
Stacked barcode). Must be an even value from 2 to 22. Default is 22, which will
print the barcode as a single row.