Special codes for box / underline information – Avery Dennison PCL User Manual
Page 40

38 •••• Reference Guide
PAXAR PCL
Special Codes for Box / Underline Information
~LW9999
630,960,6X6,SNAP
This command specifies the end web position of a box / underline field. The web
position is in thousandths of an inch.
Note: The starting web coordinate is the position that is specified in the FW command.
Compatibility Notes:
630, 650 For these printers the resolution or smallest increment is 33 thousandths.
6X6,SNAP The actual resolution or smallest increment is 1/dpi of the printer.
~LP99999
630,960,6x6,SNAP
This command specifies the end pull position of the box / underline field. The pull
position is in thousandths of an inch.
Note: The starting pull coordinate is the position that is specified in the FP command.
Compatibility Notes:
630, 650 For these printers the resolution or smallest increment is 33 thousandths.
6X6,SNAP The actual resolution or smallest increment is 1/dpi of the printer.
~LV99
630,6X6,SNAP
This command specifies the width of the vertical lines in dots.
Compatibility Notes:
630, 650 For these printers the resolution or smallest increment is 4 thousandths.
6X6,SNAP The actual resolution or smallest increment is 1/dpi of the printer.
~LH99
630,6X6,SNAP
This command specifies the width of the horizontal lines in dots.
Compatibility Notes:
630, 650 For these printers the resolution or smallest increment is 4 thousandths.
6X6,SNAP The actual resolution or smallest increment is 1/dpi of the printer.
~LT_
960,6X6,SNAP
This command specifies what type of shape is being drawn. An L means draw a line
using the two points. A B means draw a box using the two points.
~LF9
630,960,6X6,SNAP
This command specifies the mode in which the box / underline image is created on the
tag. The 0 mode displays the box / underline as a normal box or underline. The 1
mode clears the box even if the box overlays another fields image. The 2 mode fills the
box.
Compatibility Note: