Special codes for logo information – Avery Dennison PCL User Manual
Page 42
![background image](https://www.manualsdir.com/files/772994/content/doc042.png)
40 •••• Reference Guide
PAXAR PCL
Special Codes for Logo Information
~GH9
630
This command specifies the expansion multiple for the logo in the pull direction.
~GV9
630
This command specifies the expansion multiple for the logo in the web direction.
~GT99
630,650,960,6X6,SNAP
This command specifies the logo set number. Refer to Appendix E for details about
printing logos and graphic image files.
Compatibility Note: The 630 is limited to only eight types of logo types.
630 The logo images reside on the I.C. card which plugs into the side of the 630
printer. In order for a logo type to be chosen the logo type must be present on the
I.C. card and the I.C. card must be plugged into the printer in order for a format
layout that contains a logo field to work.
650 The 650's logo images reside in a file on the hard disk drive in the 650. In order for
the logo type to be chosen and printed the logo's file must on the 650.
~GM9
6X6,SNAP
This command specifies the file structure type of the image. The valid values are
3 Specifies the file type to be BMP. Currently logos are prepared as BMP files. The
BMP file structure must follow industry standards.
4 Specifies the file type to be PCX. The graphic image must follow industry standards
for the PCX file structure. Many applications produce the PCX files.
~GE_
Reserved for future printers.
This command specifies the horizontal justification of the logo. The '_' should be
replaced by one of the options.
L The logo will be left justified.
C The logo will be centered.
R The logo will be right justified.
~GU_
Reserved for future printers.
This command specifies the vertical justification of the logo. The '_' should be replaced
by one of the options.
Refer to Appendix E for details on
printing logos and graphic image files.