Artesyn Centellis 2000 Shelf - DC Installation and Use (June 2014) - Manual (Page 74)

System Installation
Centellis 2000 Shelf - DC Installation and Use (6806800G45F) 74
3.2.3 Tools You Will Need
Before you start the installation, make sure that you have all the necessary equipment at hand.
3.3 Installation
This section provides the information and instructions needed to mount a system in a rack.
Usage Equipment
General Phillips head screwdriver #1 and #2
Wrenches (7, 8, 10 mm or 0.28, 0.31, 0.39 inch)
Large, medium and small Phillips screwdrivers
Antistatic mat
ESD wrist strap
Shelf Transport equipment: Hand truck or forklift/pallet truck
Lifting equipment for installation
Grounding Earth grounding cable with a two-hole lug, distance 5/8" (15.9 mm)
PEM Power input cables with a minimum cross section of 4 mm2, AWG 12
System Access Crossover cable
Twisted pair Ethernet cable
CAT-5