2 power-down before blade extraction – Artesyn Centellis 2000 Shelf - DC Installation and Use (June 2014) User Manual

Page 155

Text mode
Original mode

Software

Centellis 2000 Shelf - DC Installation and Use (6806800G45F)

155

11.3.2 Power-Down Before Blade Extraction

When a blade is supposed to be extracted, it needs to be powered down first. As soon as the
blade has reached M6, an IPMI command is sent that tells the payload that the blade will be
powered down. The payload then has time to carry out all necessary steps. The blade is
powered down afterwards.

It may take a long time before the payload has finished carrying out all necessary steps and
the blade can be powered down.

This manual is related to the following products:

Centellis 2000 DC-1.2 Installation and Use (May 2014) Centellis 2000 Shelf-AC Installation and Use (May 2014) Centellis 2000 Shelf Release 3.0 Installation and Use (May 2014) Centellis 2100 Release 3.0 Installation and Use (March 2015)