Artesyn Centellis 2000 Shelf - DC Installation and Use (June 2014) - Manual (Page 29)

Safety Notes
Centellis 2000 Shelf - DC Installation and Use (6806800G45F) 29
Shelf Manager and Hub Board
Data Loss
Removing the product with the blue LED still blinking may result in data loss. Wait until the
blue LED is permanently illuminated before removing the board.
Cabling
Personal Injury
The cabling should follow existing cable paths using existing or similar cable fastenings.
Never change the system's cabling as delivered by Artesyn. Check proper function of the
system after cabling extensions. To avoid injuries always ensure that cables are securely
installed so that nobody can trip over them.
Personal Injury through Electric Shock
Touching contacts and cables during system operation can cause injuries through electric
shock.
To avoid electric shock make sure that contacts and cables of the system cannot be touched
while the system is operating. If in doubt concerning cabling, ask your local Artesyn
representative.
Cable Damage
Folding the fiber cable damages the cable and inhibits the data transmission. Therefore, make
sure you do not fold the cable.