AMETEK MX CTSH - Manual (Page 91)

California Instruments Revision H 91
User Manual MX Series CTSH Compliance Test System
8. EN 61000-4-13 Harmonics and Interharmonics
8.1 About this Chapter
The IEC 61000-4-13 Harmonics and Inter harmonics test offers range of sub-tests and user options. We
recommend you familiarize yourself with the actual standard document. IEC standards are available
through
www.iec.ch . The 2002-03 version of the IEC 61000-4-13 standard is implemented on the MX
Series starting with revision 0.31 firmware. If the firmware in the MX Series AC source is less than 0.31, the
Meister curve function will not be available. Contact California Instruments customer service for upgrade
information. (
[email protected] ). The MXGui will automatically disable the Meister curve function if it
detects older firmware.
The EN 61000-4-13 implementation in the MXGUI is based on a first edition of the EN 61000-4-13
standard. This test window is available only if the MX Series unit connected has the -413 option installed.
Figure 8-1: EN 61000-4-13 Test Window