AMETEK MX CTSH - Manual (Page 134)

User Manual MX Series CTSH Compliance Test System
Line Input
Line Voltage 115 Vac±10% / 230 Vac±10%
Line Current 200 mA @ 115 Vac / 60 Hz
110 mA @ 230 Vac / 50 Hz
Line Frequency 47-63 Hz
Fuse Rating 0.25 A slow acting @ 115 Vac
0.125 A slow acting @ 230 Vac
Mechanical
Dimensions
Including base HxWxD (inch) 54.8 x 24.75 x 37
HxWxD (mm). 1392 x 629 x 940
Weight Lbs / kg 400 lbs / 200 Kg
15.8 OMNI-3-75 Environmental
Parameter Specification
Operating Temp: 0 degrees to +40 degrees Celsius.
Protection: OMNI will dis-engage if internal heat sink temperature
exceeds 95° C. Re-engages once temperatures
declines below threshold.
Storage Temp: 0 degrees to +70 degrees Celsius.
Humidity:
Operating:.
≤
90% RH up to 40
°
C
Storage:
≤
90% RH up to 40
°
C,
≤
75% RH up to 70
°
C.
Creepage and Clearance: Rated for Pollution Degree 2.
Insulation: Rated to Installation Category (Over voltage Category)
II
Vibration: Designed to meet NSTA 1A transportation levels.
Shock: Designed to meet NSTA 1A transportation levels.
15.9 OMNI-3-75 Regulatory
Parameter Specification
Electromagnetic Emissions and
Immunity: Designed to meet EN50081-1 and EN50082-1
European Emissions and Immunity standards as
required for the “CE” mark.
Acoustic Noise: 72 dBA maximum. (@ 1 meter)
Safety: Designed to meet EN61010-1 European safety
standards as required for the “CE” mark.
California Instruments Revision G 131