AMETEK MX CTSH - Manual (Page 129)

User Manual MX Series CTSH Compliance Test System
15. Specifications
15.1 About This Chapter
This chapters provides the technical specifications of the MXCTS measurement system and the
Power Analysis and Conditioning System unit (PACS-3-75). If the CTS system you have includes
an AC power source, refer to the separate AC source user manual that shipped with the AC
source.
Note: All specifications listed in the manual are valid at an ambient temperature of 23° ± 5° and
apply after a 15-minute warm-up period.
15.2 PACS-3-75 Measurement Specifications
The MXCTS measurement system is implemented using a high speed Analog to Digital PCI plug in
board. This board needs to be installed properly in order to function according to the specification
listed here.
Measurement Specification Unit
Bandwidth
Anti Aliasing
Bandpass ripple
> 60 dB at 5 KHz
< 2 % up to 2.5 KHz %
Volts
Range 0.01 - 312.00 V
rms
Max. input 1000 V
peak
Max. crest factor 5:1
Accuracy ± 0.1 % ± 0.05 % FS ± 3 mV mV
Resolution 10 mV
Voltage CMRR 80 dB
RMS Current
Current ranges (Auto ranging) 16, 40, 75 A
rms
Highest range 75.00 A
rms
Max. input [permanent, no damage if
< 200 A
peak
] PACS-3-75
75.00 A
rms
Max. Crest Factor at max current [75
A Range] 2.5:1
Max. Crest Factor [Low Range] 20:1
Accuracy ± 0.1 % ± 0.05 % FS ± 5 mA mA
Resolution 1 mA
California Instruments Revision G 126