AMETEK MX CTSH - Manual (Page 24)

California Instruments Revision H 24
User Manual MX Series CTSH Compliance Test System
3. System Installation
3.1 About This Chapter
This chapter provides information on system installation and covers both the hardware connections that
need to be made between the various components and the software setup. Proper installation of all
hardware components and software modules is required to successfully use the MXCTS system. Some
experience with AC power systems and PC’s running Windows is assumed.
3.2 Hardware Installation
3.2.1 Unpacking
Inspect the unit for any possible shipping damage immediately upon receipt. If damage is evident, notify
the carrier. DO NOT return an instrument to the factory without prior approval. Do not destroy the packing
container until the unit has been inspected for damage in shipment.
3.2.2 AC Source
Refer to the MX Series or RS Series User Manual provided with the AC Source.
The main power requirements for the CTS are dictated by the AC power sources used and the power levels
that the Equipment Under Test will demand. Consult the MX Series Power source manual for input current
and input wiring requirements.