beautypg.com

Cilxs_configuretriggeredangle – AMETEK Ls Series Driver Manual User Manual

Page 84

background image

IVI Driver Manual

Lx / Ls Series

80

ciLxs_ConfigureTriggeredAngle


ViStatus ciLxs_ConfigureTriggeredAngle (ViSession instrumentHandle,
ViChar _VI_FAR phaseName[],
ViReal64 angle);

Purpose

This function configures the output phase when a triggered step or pulse
transient occurs. The phase of the output voltage waveform is expressed
relative to an internal reference.

Parameter List

instrumentHandle

Variable Type ViSession

The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.

Default Value: None


phaseName

Variable Type ViChar[]

Pass the virtual channel name that you assign to the instrument in
the Configuration Utility.

Virtual channel names are aliases for instrument-specific channel
strings. The instrument-specific channel strings can differ from one
instrument to another. Virtual channel names allow you to use and
swap instruments without having to change the channel names in your
source code. You assign a virtual channel name to an
instrument-specific channel through the Configuration Utility. This
control accepts virtual channel names you have assigned to the
specific instrument you are using. It also accepts the
instrument-specific channel names.

Default Value: ""

Notes:

(1) You can specify the channel name as a string variable or as a
literal enclosed in double quotes.


angle

Variable Type ViReal64

Pass the output phase when a triggered step or pulse transient
occurs. The phase of the output voltage waveform is expressed
relative to an internal reference. The phase angle is programmed in

This manual is related to the following products: