AMETEK Ls Series Driver Manual - Manual (Page 100)

IVI Driver Manual Lx / Ls Series
96
ciLxs_ConfigureTriggeredVoltageLevel
ViStatus ciLxs_ConfigureTriggeredVoltageLevel
(ViSession instrumentHandle, ViChar _VI_FAR phase[],
ViReal64 triggeredLevel);
Purpose
This function configures the AC rms output voltage level of the AC
source.
Parameter List
instrumentHandle
Variable Type ViSession
The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.
Default Value: None
phase
Variable Type ViChar[]
Pass the virtual channel name that you assign to the instrument in
the Configuration Utility.
Virtual channel names are aliases for instrument-specific channel
strings. The instrument-specific channel strings can differ from one
instrument to another. Virtual channel names allow you to use and
swap instruments without having to change the channel names in your
source code. You assign a virtual channel name to an
instrument-specific channel through the Configuration Utility. This
control accepts virtual channel names you have assigned to the
specific instrument you are using. It also accepts the
instrument-specific channel names.
Default Value: ""
Notes:
(1) You can specify the channel name as a string variable or as a
literal enclosed in double quotes.
triggeredLevel
Variable Type ViReal64
Pass the AC rms amplitude that the output waveform will be set to
during a triggered step or pulse transient. The driver sets the
CILXS_ATTR_TRIGGERED_VOLTAGE_LEVEL attribute to this value.