AMETEK Ls Series Driver Manual - Manual (Page 12)

IVI Driver Manual Lx / Ls Series
8
________________________________________________________________________________
How To Use This Document:
Use this document as a programming reference manual.
It describes each function in the
California Instr Lx/Ls Series AC Source
instrument. The functions appear in alphabetical order, with a description
of the function and its C syntax, a description of each parameter, and a list
of possible error codes.
________________________________________________________________________________
Function Tree Layout:
Class/Panel Name: Function Name:
Initialize ciLxs_init
Initialize With Options ciLxs_InitWithOptions
Configuration
Output
Configure Output ciLxs_ConfigureOutput
Configure Output Enabled ciLxs_ConfigureOutputEnabled
Configure Output ALC State ciLxs_ConfigureOutputALCState
Configure Output Range ciLxs_ConfigureOutputRange
Configure Current Limit ciLxs_ConfigureCurrentLimit
Configure OVP ciLxs_ConfigureOVP
Configure Voltage Level ciLxs_ConfigureVoltageLevel
Configure Frequency Value ciLxs_ConfigureFrequencyValue
Configure Output Phase Mode ciLxs_ConfigureOutputPhaseMode
Configure Phase Angle ciLxs_ConfigurePhaseAngle
Configure Waveform ciLxs_ConfigureWaveform
Configure Clipping Level ciLxs_ConfigureClippingLevel
Configure Slew Voltage Level
ciLxs_ConfigureSlewVoltageLevel
Configure Slew Frequency ciLxs_ConfigureSlewFrequency
Get Phase Name ciLxs_GetPhaseName
Arbitrary Waveform
Write Arb Waveform ciLxs_WriteArbWaveform
Query Arb Waveform Capabilities
ciLxs_QueryArbWaveformCapabilities
Clear All Arb Waveforms ciLxs_ClearAllArbWaveforms
Clear Arb Waveforms ciLxs_ClearArbWaveforms
Query Defined Waveforms ciLxs_QueryDefinedWaveforms
Acquisition
Configure Acq Trigger Source
ciLxs_ConfigureAcqTriggerSource
Configure Acq Start Time
ciLxs_ConfigureAcquisitionStartTime
Triggering
Configure Trigger Source ciLxs_ConfigureTriggerSource
Configure Trigger Delay ciLxs_ConfigureTriggerDelay