AMETEK Ls Series Driver Manual - Manual (Page 76)

IVI Driver Manual Lx / Ls Series
72
ciLxs_ConfigureSynchronizationPhase
ViStatus ciLxs_ConfigureSynchronizationPhase (ViSession instrumentHandle,
ViReal64 angle);
Purpose
This function configures the phase angle with respect to an internal
phase reference at which PHASe:SYNChronous:SOURce becomes true.
Parameter List
instrumentHandle
Variable Type ViSession
The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.
Default Value: None
angle
Variable Type ViReal64
Pass the phase angle with respect to an internal phase reference.
The driver sets the CILXS_ATTR_TRIGGER_SYNCHRONIZATION_PHASE
attribute to this value.
Units: degress
Valid Range:
-360.0 to 360.0
Default Value: 0.0
Return Value
Returns the status code of this operation. The status code either
indicates success or describes an error or warning condition. You
examine the status code from each call to an instrument driver
function to determine if an error occurred.
To obtain a text description of the status code, call the
ciLxs_error_message function. To obtain additional information about
the error condition, call the ciLxs_GetError function. To clear the
error information from the driver, call the ciLxs_ClearError
function.
The general meaning of the status code is as follows: