AMETEK Ls Series Driver Manual - Manual (Page 103)

IVI Driver Manual Lx / Ls Series
99
ciLxs_ConfigureTriggeredVoltageMode
ViStatus ciLxs_ConfigureTriggeredVoltageMode (ViSession instrumentHandle,
ViChar _VI_FAR phaseName[],
ViInt32 transientMode);
Purpose
This function configures the ac rms output voltage controlled during a
triggered output transient.
Parameter List
instrumentHandle
Variable Type ViSession
The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.
Default Value: None
phaseName
Variable Type ViChar[]
Pass the virtual channel name that you assign to the instrument in
the Configuration Utility.
Virtual channel names are aliases for instrument-specific channel
strings. The instrument-specific channel strings can differ from one
instrument to another. Virtual channel names allow you to use and
swap instruments without having to change the channel names in your
source code. You assign a virtual channel name to an
instrument-specific channel through the Configuration Utility. This
control accepts virtual channel names you have assigned to the
specific instrument you are using. It also accepts the
instrument-specific channel names.
Default Value: ""
Notes:
(1) You can specify the channel name as a string variable or as a
literal enclosed in double quotes.
transientMode
Variable Type ViInt32
Specifies how the AC rms output voltage is controlled during a
triggered output transient. The driver sets the
CILXS_ATTR_TRIGGERED_VOLTAGE_MODE attribute to this value.