AMETEK Ls Series Driver Manual - Manual (Page 120)

IVI Driver Manual Lx / Ls Series
116
ciLxs_ConfigureTrigSlewFrequencyList
ViStatus ciLxs_ConfigureTrigSlewFrequencyList
(ViSession instrumentHandle, ViInt32 listSize,
ViReal64 _VI_FAR frequency[]);
Purpose
This function configures the sequence of frequency slew list points.
Parameter List
instrumentHandle
Variable Type ViSession
The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.
Default Value: None
listSize
Variable Type ViInt32
The number of list points.
frequency
Variable Type ViReal64[]
The sequence of frequency slew list points used to configure the AC
Source.
The frequency points are given in the command parameters, which are
separated by commas. The order in which the points are entered
determines the sequence in which they are output when a list is
triggered.
Units: HZ (Hertz) per second
Valid Range: 0.0 to 9.9e31
NOTE:
If passed value is lower than zero then instrument will set maximum
possible range (INFinity).
Return Value
Returns the status code of this operation. The status code either
indicates success or describes an error or warning condition. You
examine the status code from each call to an instrument driver