AMETEK Ls Series Driver Manual - Manual (Page 122)

IVI Driver Manual Lx / Ls Series
118
ciLxs_ConfigureTrigSlewFrequencyMode
ViStatus ciLxs_ConfigureTrigSlewFrequencyMode
(ViSession instrumentHandle, ViInt32 transientMode);
Purpose
This function configures the frequency slew rate controlled during a
triggered output transient.
Parameter List
instrumentHandle
Variable Type ViSession
The ViSession handle that you obtain from the ciLxs_init or
ciLxs_InitWithOptions function. The handle identifies a particular
instrument session.
Default Value: None
transientMode
Variable Type ViInt32
Specifies how the frequency slew rate is controlled during a
triggered output transient. The driver sets the
CILXS_ATTR_TRIGGERED_SLEW_FREQUENCY_RATE_MODE attribute to this
value.
Valid Values:
- CILXS_VAL_TRIGGER_MODE_FIX - The frequency slew rate is unaffected
by a triggered output transient.
- CILXS_VAL_TRIGGER_MODE_STEP - The frequency slew rate is programmed
to the value set by ciLxs_ConfigureTriggeredSlewFrequency when a
triggered transient occurs.
- CILXS_VAL_TRIGGER_MODE_PULSE - The frequency slew rate is changed
to the value set by ciLxs_ConfigureTriggeredSlewFrequency for a
duration determined by the ciLxs_ConfigurePulse function.
- CILXS_VAL_TRIGGER_MODE_LIST -The frequency slew rate is controlled
by the frequency list when a triggered transient occurs.
Default Value:
CILXS_VAL_TRIGGER_MODE_FIX
Return Value
Returns the status code of this operation. The status code either
indicates success or describes an error or warning condition. You
examine the status code from each call to an instrument driver
function to determine if an error occurred.
To obtain a text description of the status code, call the
ciLxs_error_message function. To obtain additional information about
the error condition, call the ciLxs_GetError function. To clear the